Gigabyte G27F - Using the Device; Powering the Monitor On;Off

-20-
LCD Monitor User's Manual
USING THE DEVICE
Turning the Power
On/O
Power
On
1. Connect one end of the power cable to the adapter and connect
the output cable of the adapter to the DC IN jack of the monitor.
2. Connect other end of the the power cable to a power outlet.
3. Press the Control button to turn on the monitor. The Power LED will
light in white, indicating the monitor is ready to use.
Power O
Press the Control button for 2 seconds to turn o the monitor.
Note: When the Main menu appears on the screen, you can also turn o
the monitor by moving the Control button down (
). Refer to page 25.