Gigabyte G27Q - Quick Switch; Other Settings

-35-
LCD Monitor User's Manual
Item Description
Quick Switch Assign the function of the hot keys.
Available options: Aim Stabilizer, Black Equalizer,
Low Blue Light, Volume, Input, Contrast, Bright-
ness, and Picture Mode.
The default setting of the hot keys as below:
D Up(
):Black Equalizer
D Down(
):Picture Mode
D Right(
):Input
D Left(
):Volume
Other Settings • Resolution Notice: When this function is en-
abled, the recommended resolution message
will appear on the screen when the monitor
switches to another input source.
• Input Auto Switch: When this function is en-
abled, it automatically switches to an available
input source.
• Auto Power OFF: When this function is en-
abled, the monitor will automatically turn o
after a certain amount of time.
• DisplayPort Ver.: Set the DisplayPort version to
1.1, 1.2 +HDR.
Note:
• Make sure to congure this option based on
the DisplayPort version supported by your
graphics card.
• DisplayPort version can’t set to 1.1 when
FreeSync Premium function is activated.