4
English
Smart USB Backup Guide
WARNING
y
You can backup original recovery image through this application in case of
losing by device damage.
y
You can backup original recovery image to USB Flash Drive and restore the
system if any storage system replacement with the recovery USB Flash Drive.
y
Before you restore the system through the recovery USB Flash Drive, please
make sure that you have already made the backup of your data.
y
Please DO NOT shut down or un-plug the system when performing backup
through recovery USB Flash Drive.
• Please plug in the USB Flash
Drive which is at least 32GB in
capacity to make the original
image (backup the data in USB
first. All data will be eliminated
during the creation of recovery
USB Flash disk)
• Insert the driver disk to your
optical drive and run the install of
“Smart USB Backup” (for none-
ODD model,please use USB
ODD device or download from
http://www.gigabyte.com
• Run the “Smart USB Backup”
after nishing the install.
• Select your USB Flash disk from
the drop-down list and start to
create the recovery USB disk.
• The window will pop out when the creation of recovery disk is done.
• Please press F12 on starting the system when you need to restore the system.
Select“boot from recovery USB disk” and the system will be restored.
• The time needed for restore will be around 30 mins(time needed may vary by USB
disk model).
1
2
3
4
5
To Next Page
Loading...
Need help?
General
