6VX7-4X Motherboard
65
•
OnBoard Serial Port 2
Auto BIOS will automatically setup the port 2 address. (Default Value)
3F8/COM1 Enable onBoard Serial port 2 and address is 3F8.
2F8/COM2 Enable onBoard Serial port 2 and address is 2F8.
3E8/COM3 Enable onBoard Serial port 2 and address is 3E8.
2E8/COM4 Enable onBoard Serial port 2 and address is 2E8.
Disabled Disable onBoard Serial port 2.
•
Serial Port 2 Mode
(This item allows you to determine which Serial Port 2 Mode of onboard I/O chip)
ASK IR Set onboard I/O chip Serial Port 2 to ASK IR Mode.
IrDA Set onboard I/O chip Serial Port 2 to IrDA Mode.
Normal Set onboard I/O chip Serial Port 2 to Normal Mode. (Default Value)
•
Duplex Mode
Half Duplex
IR Function Duplex Half.
N/A
Disabled this function. (Default Value)
Full Duplex
IR Function Duplex Full.
•
On Board Parallel port
378 Enable On Board LPT port and address is 378.
278 Enable On Board LPT port and address is 278.
3BC Enable On Board LPT port and address is 3BC.
Auto Set On Board LPT port is Auto. (Default Value)
Disabled Disable On Board LPT port.
•
Parallel Port Mode
EPP Using Parallel port as Enhanced Parallel Port.
ECP Using Parallel port as Extended Capabilities Port. (Default Value)
Normal Normal Operation.
•
Parallel Port DMA
Auto Set Auto to parallel port mode DMA Channel. (Default Value)
3 Set Parallel Port DMA is 3.
1 Set Parallel Port DMA is 1.
0 Set Parallel Port DMA is 0.
To Next Page
Loading...
