6WMM7 Series Motherboard
35
A.5 Notices :
1. In order for STR to function properly, several hardware and software
requirements must be satisfied:
A. Your ATX power supply must comply with the ATX 2.01 specification
(provide more than 720 mA 5V Stand-By current).
B. Your SDRAM must be PC-100 compliant.
2. Jumper JP9 is provided to connect to the STR LED in your system chassis.
[Your chassis may not provide this feature.] The STR LED will be
illuminated when your system is in STR sleep mode.
6WMM7-1
ICH/
82801
GMCH/
82810
CPU
AC97
YMF
744
Main
BIOS
Backup
BIOS
+
STR LED
1
STR LED Connector
External.
JP9
To Next Page
Loading...
