Panel and Jumper Definition
20
JP4: USB Device Wake up Selection
Pin No. Definition
1-2 close Normal (Default)
2-3 close USB Device Wake up
1
(If you want to use “
USB Dev Wakeup from S3~S5
”
function, you have to set the BIOS setting “USB Dev
Wakeup from S3~S5” enabled, and the jumper “
JP4
”
enabled)
*(Power on the computer and as soon as memory
counting starts, press <Del>. You will enter BIOS Setup.
Select the item “
POWER MANAGEMENT SETUP
”,
then select “
USB Dev Wakeup from S3~S5
”.
Remember to save the setting by pressing "ESC" and
choose the “SAVE & EXIT SETUP” option.)
JP7: STR Function Enable
Pin No. Definition
1-2 close STR Enable
2-3 close Normal (Default)
1
To Next Page
Loading...
