GA-8I915P Dual Graphic Motherboard - 28 -
English
17) IR
Be careful with the polarity of the IR connector while you connect the IR. Please contact your
nearest dealer for optional IR device.
1
Pin No. Definition
1 Power
2 No Pin
3 IR RX
4 GND
5 IR TX
18) CLR_CMOS (Clear CMOS)
You may clear the CMOS data to its default values by this jumper. To clear CMOS, temporarily
short 1-2 pin. Default doesn't include the "Shunter" to prevent from improper use this jumper.
Open: Normal
1
1
Short: Clear CMOS
To Next Page
Loading...
