Gigabyte GA-945GCM-S2L

To Next Page

To Previous Page

Step 4:

Press <Esc> and then <Enter> to exit Q-Flash and reboot the system. As the system boots, you should

see the new BIOS version is present on the POST screen.

Step 5:

During the POST, press <Delete> to enter BIOS Setup. Select Load Optimized Defaults and press

<Enter> to load BIOS defaults. System will re-detect all peripherals devices after a BIOS update, so we

recommend that you reload BIOS defaults.

• Standard CMOS Features

• Advanced BIOS Features

• Integrated Peripherals

• Power M;

Load Fail-Safe Defaults

Load Optimized Defaults

Set Supervisor Password

• PnP/PCI ( jj Load Optimized Defaults (Y/N)? Y

| • PC Health juitua

• Frequency/Voltage Control

ESC: Quit

F8: Q-Flash

ti-»«-: Select Item

FIO: Save & Exit Setup

Load Optimi/.ed Defaults

Press <Y> to load BIOS defaults

Step 6:

Select Save & Exit Setup and then press <Y> to save settings to CMOS and exit BIOS Setup. The

procedure is complete after the system restarts.

GA-945GCM-S2L/S2C Motherboard

- 64 -

Gigabyte GA-945GCM-S2L - Page 64