Gigabyte GA-945GCM-S2L - Installing the S;Pdifout Cable (Optional)

5-1-2 Installing the S/PDIFOut Cable (Optional)
The S/PDIF out cable provides S/PDIF out functionalities.
Optical
S/PDIF Out
Coax,al
S/PDIFOut
S/PDIF out:
The S/PDIF out jacks can transmit audio signals to an external decoder for decoding to get the best
audio quality. Install the S/PDIF in and out cable first if you want to output S/PDIF digital audio signals
to an external decoder.
A. Installing the S/PDIF Out Cable:
Step 1:
First, attach the connector at the end of the cable to the SPDIF_0
header on your motherboard.
Pin 1 (the red wire) of the S/PDIF out cable must align
with pin 1 of the SPDIF_0 header. Incorrect connection
may render the device unusable or even result in
damage to the device.
GA-945GCM-S2L/S2C Motherboard
- 72 -