Step 2:
Click the Audio I/O tab. In the speaker list on the
left, select 2CH Speaker, 4CH Speaker, or 6CH
Speaker according to the type of speaker configura-
tion you wish to set up.
Step 3:
The pictures to the right show the 2-, 4-, 5.1-channel 2-Channel Speakers:
speaker configurations.
Speakers or
Headphones
4-Channel Speakers:
"4
•
'" Front Speaker Out
Rear Speaker Out
5.1-Channel Speakers:
Front Speaker Out
Rear Speaker Out
Center/Subwoofer
Speaker Out
Step 4:
Everytime you connect an audio device to an audio
jack, the Connected device box appears. Select
the device according to the type of device you connect.
Then click OK to complete the configuration.
GA-945GCM-S2L/S2C Motherboard - 70 -
To Next Page
Loading...
