EasyManua.ls Logo

Gigabyte GA-945GCMX-S2 - Standard CMOS Features

Gigabyte GA-945GCMX-S2
71 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-1 Standard CMOS Features
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Standard CMOS Features
Date (mm:dd:yy)
Г e, Jun 5 2007
Item Help
Time (hh:mm:ss) 14:31:24
Menu Levels
IDE Channel 0 Master
IDE Channel 0 Slave
IDE Channel 2 Master
IDE Channel 2 Slave
IDE Channel 3 Master
IDE Channel 3 Slave
[None]
[None]
[None]
[None]
[None]
[None]
/
Drive A
Floppy 3 Mode Support
[1.44M, 3.5"]
[Disabled]
Halt On
[All. But Keyboard]
J
Base ' T; .11Л
xi i! Met,
МОК
239M
ч
i
i
jfP.-»*-: Move Enter: Select
F5: Previous Values
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
ESC: Exit F1: General Help
F7: Optimized Defaults
Date
The date format is <week>, <month>, <day>, <year>.
> Week The week, from Sun to Sat, determined by the BIOS and is display-only
Month The month, Jan. Through Dec.
Day The day, from 1 to 31 (or the maximum allowed in the month)
Year The year, from 2000 through 2099
Time
The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour
military-time clock. For example, 1 p.m. is 13:0:0.
o- IDE Channel 0 Master/Slave
IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection.
и- IDE Channel 0 Master/Slave
IDE devices setup. You can use one of three methods:
Auto Allows BIOS to automatically detect IDE/SATA devices during POST. (Default
value)
None Select this if no IDE/SATA devices are used and the system will skip the
automatic detection step and allow for faster system start up.
Manual User can manually input the correct settings.
Access Mode Use this to set the access mode for the hard drive. The four options are:
CHS/LBA/Large/Auto(default:Auto)
Capacity Capacity of currectly installed hard drive,
o- IDE Channel 2,3 Master/Slave
IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection.
Extended IDE Drive You can use one of the two methods:
Auto Allows BIOS to automatically detect IDE/SATA devices during POST(default)
None Select this if no IDE/SATA devices are used and the system will skip the
automatic detection step and allow for faster system start up.
GA-945GCM(X)-S2 Motherboard
- 34 -

Related product manuals