Gigabyte GA-965P-S3 - Page 27

Hardware Installation- 27 -
English
13) PWR_LED
The PWR_LED connector is connected with the system power indicator to indicate whether the
system is on/off. It will blink when the system enters suspend mode (S1).
Pin No. Definition
1 MPD+
2 MPD-
3 MPD-
1
14) CD_IN (CD IN)
Connect CD-ROM or DVD-ROM audio out to the connector.
Pin No. Definition
1 CD-L
2 GND
3 GND
4 CD-R
1