Gigabyte GA-965P-S3 - Integrated Peripherals Setup

GA-965P-DS3/S3 Motherboard - 38 -
English
2-3 Integrated Peripherals
SATA AHCI Mode
Disabled Set the SATA ports (controlled by ICH8) to IDE mode. (Default value)
AHCI Set the SATA ports (controlled by ICH8) to AHCI mode.
SATA Port0-3 Native Mode
Disabled Set SATA Port0~3 to operate at Legacy IDE mode. (Default value)
Enabled Set SATA Port0~3 to operate at Native IDE mode.
USB Controller
Enabled Enable USB Controller. (Default value)
Disabled Disable USB Controller.
USB 2.0 Controller
Disable this function if you are not using onboard USB 2.0 feature.
Enabled Enable USB 2.0 Controller. (Default value)
Disabled Disable USB 2.0 Controller.
USB Keyboard Support
Disabled Disable USB Keyboard Support. (Default value)
Enabled Enable USB Keyboard Support.
USB Mouse Support
Disabled Disable USB Mouse Support. (Default value)
Enabled Enable USB Mouse Support.
Legacy USB storage detect
This option allows users to decide whether to detect USB storage devices, including USB flash
drives and USB hard drives during POST.
Enabled BIOS will scan all USB storage devices. (Default value)
Disabled Disable this function.
Azalia Codec
Auto Auto detect Azalia audio function. (Default value)
Disabled Disable Azalia audio function.
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
Integrated Peripherals
SATA AHCI Mode [Disabled]
SATA Port0-3 Native Mode [Disabled]
USB Controller [Enabled]
USB 2.0 Controller [Enabled]
USB Keyboard Support [Disabled]
USB Mouse Support [Disabled]
Legacy USB storage detect [Enabled]
Azalia Codec [Auto]
Onboard H/W LAN [Enabled]
 SMART LAN [Press Enter]
Onboard LAN Boot ROM [Disabled]
Onboard SATA/IDE Device [Enabled]
Onboard SATA/IDE Ctrl Mode [IDE]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level