GA-965P-DS3/S3 Motherboard - 48 -
English
System Voltage Control
This item allows the users to decide whether to configure system voltage settings by their
requirements.
Auto Lets the BIOS configure all system voltage settings.
Manual Manually configure the system voltage settings. (Default value)
DDR2 OverVoltage Control
Please note that by overclocking your system through the increase of the DIMM voltage, damage
to the memory may occur.
Normal Supply DIMM voltage as DIMM required. (Default value)
+0.1V ~ +0.7V Increase DIMM voltage by 0.1V ~0.7V.
PCI-E OverVoltage Control
Normal Supply PCIe voltage as PCIe required. (Default value)
+0.1V ~ +0.3V Increase PCIe voltage by 0.1V ~0.3V.
FSB OverVoltage Control
Normal Supply FSB voltage as FSB required. (Default value)
+0.1V ~ +0.3V Increase FSB voltage by 0.1V ~0.3V.
(G) MCH OverVoltage Control
Normal Supply (G)MCH voltage as (G)MCH required. (Default value)
+0.1V ~ +0.3V Increase (G)MCH voltage by 0.1V ~0.3V.
Incorrect using it may cause your system broken. For power End-User use only!
CPU Voltage Control
Supports adjustable CPU Vcore. The adjustable range is dependent on CPUs. (Default value:
Normal)
Please note that by overclocking your system through the increase of the CPU voltage, damage
to the CPU or decrease in the CPU life expectancy may occur.
Normal CPU Vcore
Display your CPU vcore voltage.
To Next Page
Loading...
