Gigabyte GA-970A-UD3P - Page 20

Hardware Installation
- 20 -
1/2) ATX_12V/ATX (2x4 12V Power Connector and 2x12 Main Power Connector)
 

off and all devices are properly installed. The power connector possesses a foolproof design. Connect the
power supply cable to the power connector in the correct orientation.
 
the computer will not start.
To meet expansion requirements, it is recommended that a power supply that can withstand high

required power, the result can lead to an unstable or unbootable system.
G.QBOFM
131
2412

G.QBOFM

5
8
1
4

Pin No. 
1 
2 
3 GND
4 GND
5 
6 
7 
8 

Pin No.  Pin No. 
1  13 
2  14 
3 GND 15 GND
4  16 
5 GND 17 GND
6  18 GND
7 GND 19 GND
8 Power Good 20 
9  21 
10  22 
11 

23 
12 

24 
