Gigabyte GA-970A-UD3P - 3-2 Installing the SATA RAID;AHCI Driver and Operating System

- 59 -

3-2 Installing the SATA RAID/AHCI Driver and Operating System

A. Installing Windows 8.1/8/7

Step 1:
You need to install the SATA RAID/AHCI driver during the OS installation. Use an alternative system to copy
Hw8 folder under
BootDrv in the driver disk.
Step 2:

you to load the driver appears, select Browse.
Step 3:





Hw7 folder.
Step 4:
AMD AHCI Compatible RAID Controller and click Next
to load the driver and continue the OS installation.
Figure 1