be connected to the default Mic in jack. Refer to the instructions on setting up a 2/4/5.1/7.1-channel
Mic In Jack (Pink)
The Mic in jack. Microphones must be connected to this jack.
Read the following guidelines before connecting external devices:
• First make sure your devices are compliant with the connectors you wish to connect.
• Before installing the devices, be sure to turn off the devices and your computer. Unplug the power
cord from the power outlet to prevent damage to the devices.
• After installing the device and before turning on the computer, make sure the device cable has
been securely attached to the connector on the motherboard.
1-7 Internal Connectors
1
2
9
6
5
3
7
4
12
141511
10
13
8
4
1) ATX_12V
2) ATX
3) CPU_FAN
4) SYS_FAN1/SYS_FAN2
5) PWR_FAN
6) CLR_CMOS
7) SATA3 0/1/2/3/4/5
8) BAT
9) F_PANEL
10) F_AUDIO
11) SPDIF_O
12) F_USB30
13) F_USB1/F_USB2/F_USB3
14) COMA
15) TPM
To Next Page
Loading...
