array on the SATA controller.
Step 1:
After the POST memory test begins and before the operating system boot begins, look for a message which
setup utility.
Figure 2
Step 2:
Main Menu
To view the disk drives assigned to arrays, press <1> to enter the View Drive Assignments window.
To create an array, press <2> to enter the window.
To delete an array, press <3> to enter the Delete LD Menu window.
To view controller settings, press <4> to enter the window.
Figure 3
RAID Option ROM Version 3.3.1540.17
(c) 2011 Advanced Micro Devices, Inc. All rights reserved.
Press <Ctrl-F> to enter RAID Option ROM Utility...
View Drive Assignments........................... [ 1 ]
Delete LD Menu....................................... [ 3 ]
Option ROM Utility (c) 2011 Advanced Micro Devices, Inc.
Press 1..4 to Select Option [ESC] Exit
[ Keys Available ]
[ Main Menu ]
To Next Page
Loading...
