Gigabyte GA-970A-UD3P - Page 68

Unique Features
- 68 -
B. Updating the BIOS



Step 1:
 
Update BIOS From Drive.
Step 2:

the message "Are you sure to update BIOS?" appears, select Yes to begin the BIOS update. The monitor will
display the update process.
Step 3:
Reboot to reboot the system.
2. Select USB Flash Drive.
 
• The Save Main BIOS to Drive
• 
• 
to an independent SATA controller, use the <End> key during the POST to access Q-Flash.

• Do not turn off or restart the system when the system is reading/updating the BIOS.
• 
Q-Flash Utility v1.05
Model Name : 970A-UD3P
BIOS Version : FAf
BIOS Date : 09/10/2014
Flash Type/Size : MXIC 25L3206E 4MB
Update BIOS From Drive
Save BIOS to Drive
Return to BIOS setup
Select Device
USB Flash Drive
Q-Flash
BIOS update is completed.
Power off
Reboot