Gigabyte GA-990FXA-UD5 R5 - OnChip SATA Controller

- 49 -
BIOS Setup
2-6 Peripherals
& Initial Display Output
SpeciestherstinitiationofthemonitordisplayfromtheinstalledPCIgraphicscardorthePCIExpress
graphics card.
PCIe1Slot SetsthePCIExpressgraphicscardonthePCIEX16_1slotastherstdisplay.(Default)
PCIe2Slot SetsthePCIExpressgraphicscardonthePCIEX4_1slotastherstdisplay.
PCIe3Slot SetsthePCIExpressgraphicscardonthePCIEX16_2slotastherstdisplay.
PCIe4Slot SetsthePCIExpressgraphicscardonthePCIEX4_2slotastherstdisplay.
PCIe5Slot SetsthePCIExpressgraphicscardonthePCIEX8slotastherstdisplay.
PCI   SetsthePCIgraphicscardonthePCIslotastherstdisplay.
& OnChip SATA Controller
 EnablesordisablestheintegratedSATAcontrollers.(Default:Enabled)
& OnChip SATA Type (SATA3 0~SATA3 3 connectors)
 EnablesordisablesRAIDfortheSATAcontrollersintegratedintheAMDChipsetorcongurestheSATA
controllers to RAID mode.
NativeIDE CongurestheSATAcontrollertoIDEmode.
RAID Enables RAID for the SATA controller.
AHCI   CongurestheSATAcontrollerstoAHCImode.AdvancedHostControllerInterface
(AHCI)isaninterfacespecicationthatallowsthestoragedrivertoenableadvanced
SerialATAfeaturessuchasNativeCommandQueuingandhotplug.(Default)
& OnChip SATA Port4/5 Type (SATA3 4~SATA3 5 connectors)
 ThisoptioniscongurableonlywhenOnChip SATA Type is set to RAID or AHCI.Congurestheoperating
modeoftheintegratedSATA34~SATA35connectors.
As SATA Type The mode depends on the OnChip SATA Type settings.
IDE   DisablesRAIDfortheSATAcontrollerandcongurestheSATAcontrollertoIDEmode.
(Default)