EasyManua.ls Logo

Gigabyte GA-990FXA-UD5 R5 - Trusted Computing

Gigabyte GA-990FXA-UD5 R5
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BIOS Setup
- 50 -
& HD Audio Azalia Device
Enablesordisablestheonboardaudiofunction.(Default:Enabled)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to
Disabled.
& Onboard USB Device
EnablesordisablestheintegratedUSBcontroller.(Default:Enabled)
& Onboard LAN Controller
EnablesordisablestheonboardLANfunction.(Default:Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
& Onboard GSATA Controller (Marvell
®
88SE9172 chip, GSATA3 6 and GSATA3 7 connectors)
Enables or disables the SATA controller integrated in the Marvell
®
88SE9172chip.(Default:Enabled)
& Onboard USB3.0 Controller (VIA
®
VL805 USB Controller)
Enables or disables the VIA
®
VL805USBcontroller.(Default:Enabled)
& Onboard eSATA Controller (Marvell
®
88SE9172 chip, eSATA connectors on the back panel)
Enables or disables the SATA controller integrated in the Marvell
®
88SE9172chip.(Default:Enabled)
& Legacy USB Support
AllowsUSBkeyboard/mousetobeusedinMS-DOS.(Default:Enabled)
& XHCI Hand-off
Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off
support.(Default:Enabled)
& EHCI Hand-off
Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off
support.(Default:Disabled)
& Port 60/64 Emulation
Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support
for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices.
(Default:Disabled)
& USB Storage Devices
Displays a list of connected USB mass storage devices. This item appears only when a USB storage device
is installed.
& IOMMU Controller
EnablesordisablesAMDIOMMUsupport.(Default:Enabled)
` Trusted Computing
& TPM SUPPORT
EnablesordisablesTrustedPlatformModule(TPM).SetthisitemtoEnable when a TPM device is installed.
(Default:Disable)

Table of Contents

Related product manuals