Gigabyte GA-990FXA-UD5 R5 - Page 52

BIOS Setup
- 52 -
` MarvellSATAControllerConguration
& GSATA Controller (Marvell
®
88SE9172 Chip, GSATA3 6 and GSATA3 7 connectors)
Enables or disables RAID for the SATA controllers integrated in the Marvell
®
88SE9172chiporcongures
the SATA controllers to AHCI mode. The area below displays the current status of the two SATA ports.
IDEMode  DisablesRAIDfortheSATAcontrollersandcongurestheSATAcontrollerstoIDE
mode.
AHCIMode CongurestheSATAcontrollerstoAHCImode.AdvancedHostControllerInterface
(AHCI)isaninterfacespecicationthatallowsthestoragedrivertoenableadvanced
SerialATAfeaturessuchasNativeCommandQueuingandhotplug.(Default)
RAID Mode Enables RAID for the SATA controllers.
& GSATA Controller (Marvell
®
88SE9172 Chip, eSATA connectors on the back panel)
Enables or disables RAID for the SATA controllers integrated in the Marvell
®
88SE9172chiporcongures
the SATA controllers to AHCI mode. The area below displays the current status of the two SATA ports.
IDEMode  DisablesRAIDfortheSATAcontrollersandcongurestheSATAcontrollerstoIDE
mode.
AHCIMode CongurestheSATAcontrollerstoAHCImode.AdvancedHostControllerInterface
(AHCI)isaninterfacespecicationthatallowsthestoragedrivertoenableadvanced
SerialATAfeaturessuchasNativeCommandQueuingandhotplug.(Default)
RAID Mode Enables RAID for the SATA controllers.