Gigabyte GA-990FXA-UD5 R5 - Page 69

- 69 -
Conguring SATA Hard Drive(s)
Figure 4
Create a RAID Array:
Step 1: On the main screen, press <Enter> on the RAID tab. Then the RAIDCongmenuappears(Figure4).
Press <Enter> on the Create VD item.
Figure 5
Step 2: The next screen displays the two hard drives you installed. Press <Enter> or <Space> on the two hard
drivesrespectivelytoaddthemintotheRAIDarray.Selectedharddrivesaremarkedwithanasterisk(Figure
5).Thenpress<Enter>onNEXT.
ENTER/SPACE: Select, ESC: Back/Exit
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
[ Adapter ] [ Devices ] [ RAID ]
Delete VD
Wipe out disk
Spare Management
RAID Cong
Create VD
ENTER/SPACE: Select, ESC: Back/Exit
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
RAID Cong
Port Disk Name Size Max Speed Status
* S1 SATA: WDC WD800JD-22LSA0 76.3GB SATA 3Gb/s FREE
NEXT
Select free disks to create
* S0 SATA: WDC WD800JD-22LSA0 76.3GB SATA 3Gb/s FREE
[ Adapter ] [ Devices ] [ RAID ]