Gigabyte GA-990FXA-UD5 - 5-1-1 AMD SB950 SATA Controller Configuration

Appendix
- 72 -
The BIOS Setup menus described in this section may differ from the exact settings for your moth-
erboard. The actual BIOS Setup menu options you will see shall depend on the motherboard you
have and the BIOS version.
B.ConguringSATAcontrollermodeinBIOSSetup
MakesuretoconguretheSATAcontrollermodecorrectlyinsystemBIOSSetup.
Step 1:
Turn onyourcomputerandpress <Delete>to enterBIOS Setupduring thePOST(Power-OnSelf-Test).
Make sure OnChip SATA Controller is enabled. To enable RAID for the SATA3 0/1/2/3 connectors, set On-
Chip SATA Type to RAID. To enable RAID for the SATA3 4/5 connectors, set OnChip SATA Type to RAID
and set OnChip SATA Port4/5 Type to As SATA Type(Figure1).
Step 2:
Save changes and exit BIOS Setup.
Figure 1