Gigabyte GA-990XA-UD3 R5 - Troubleshooting; Frequently Asked Questions

Appendix
- 82 -
6-2 Troubleshooting
6-2-1 Frequently Asked Questions
To read more FAQs for your motherboard, please go to the Support & Downloads\FAQ page on GIGABYTE's
website.
Q: Why is the light of my keyboard/optical mouse still on after the computer shuts down?
A: Some motherboards provide a small amount of standby power after the computer shuts down and that's why the light is
still on.
Q: How do I clear the CMOS values?
A: Formotherboardsthathavea ClearCMOSbutton,pressthisbuttontocleartheCMOSvalues (beforedoingthis,
pleaseturnoffthecomputerandunplugthepowercord).FormotherboardsthathaveaClearCMOSjumper,refertothe
instructions in Chapter 1 to short the jumper to clear the CMOS values. If your board doesn't have this jumper/button,
refer to the instructions on the motherboard battery in Chapter 1. You can temporarily remove the battery from the battery
holder to stop supplying power to the CMOS, which will clear the CMOS values after about one minute.
Q: Why do I still get a weak sound even though I have turned my speaker to the maximum volume?
A: Makesureyourspeakerisequippedwithaninternalamplier.Ifnot,tryaspeakerwithpower/amplier.