Gigabyte GA-B75M-HD3 - Power Management; Resume by Alarm; ErP Power Saving

- 38 -
& Resume by Alarm
Determines whether to power on the system at a desired time. (Default: Disabled)
If enabled, set the date and time as following:
Wakeupday:Turnonthesystemataspecictimeoneachdayoronaspecicdayinamonth.
Wake up hour/minute/second: Set the time at which the system will be powered on automatically.
Note: When using this function, avoid inadequate shutdown from the operating system or removal of the
AC power, or the settings may not be effective.
& ErP
Determines whether to let the system consume least power in S5 (shutdown) state. (Default: Disabled)
Note: When this item is set to Enabled, the following functions will become unavailable: PME event wake
up, power on by mouse, power on by keyboard, and wake on LAN.
2-7 Power Management
& Parallel Port
Enables or disables the onboard parallel port. (Default: Enabled)
& Device Mode
 ThisitemiscongurableonlywhenParallel Port is set to Enabled. It allows you to select an operating
mode for the onboard parallel (LPT) port. Options are: Standard Parallel Port Mode (Default), EPP Mode
(Enhanced Parallel Port), ECP Mode (Extended Capabilities Port), EPP Mode & ECP Mode.
` Intel(R) Smart Connect Technology
& ISCTConguration
Enables or disables Intel Smart Connect Technology. (Default: Disabled)