Gigabyte GA-BX2000 - Page 16

BX2000
4-16
• Fan Fail Alarm (Optional)
CPU/POWER/PANEL
No Fan Fail Alarm Function Disabled.
Yes Fan Fail Alarm Function Enabled.
• Current FAN Speed (RPM) (Optional)
Detect Fan speed status automatically.
• Current Voltage (v) VCORE / VGTL/ VCC3 / ±12V / ±5V / VBAT / 5VSB
(Optional)
Detect system’ s voltage status automatically.
• EDO CASx# MA Wait State
The default value is 1
1 Set EDO CASx# MA Wait State to 1.
2 Set EDO CASx# MA Wait State to 2.
• EDO RASx# Wait State
The default value is 1
1 Set EDO RASx# Wait State to 1.
2 Set EDO RASx# Wait State to 2.
• SDRAM CAS latency Time
The default value is Auto
3 For 67 / 83 MHz SDRAM DIMM module.
2 For 100 MHz SDRAM DIMM module.
Auto CAS latency time will be set automatically if you have
SPD on SDRAM