Gigabyte GA-BX2000 - Load Bios Defaults

BX2000
4-24
• Used MEM Length
The default value is 8K.
8K ~ 64K Select the MEM. block size.
• Assign IRQ For USB
The default value is Enabled.
Enabled Assign a specific IRQ for USB
Disabled No IRQ is assigned for USB
4.10. LOAD BIOS DEFAULTS
Figure 4.7: Load BIOS Defaults
• Load BIOS Defaults
To load BIOS defaults value to CMOS SRAM, enter "Y". If not, enter "N".