Gigabyte GA-BX2000 - Power Management Setup

BX2000
4-18
Enabled Set Address=15~16MB remap to ISA BUS.
• Delayed Transaction
The default value is Disabled.
Disabled Normal operation.
Enabled For slow speed ISA device in system.
• Clock Spread Spectrum
The default value is Disabled.
Disabled Disabled this function
Enabled Enabled Clock Spread Spectrum
4.8. POWER MANAGEMENT SETUP
Figure 4.5: Power Management Setup
R These two items will show up when “Resume by Alarm” is Enabled.
• Power Management
The default value is Enabled.
Enabled Enable Green function.
Disabled Disable Green function.