BIOS Configuration
4-19
• PM Control by APM
The default value is Yes.
Yes Enable software APM function.
No Disable software APM function.
• Video off Method
The default value is DPMS.
V/H SYNC + Blank
BIOS will turn off V/H-SYNC when gets into
Green mode for Green monitor power saving.
Blank Screen
BIOS will only black monitor when gets into
Green mode.
DPMS
BIOS will use DPMS Standard to control VGA
card. (The Green type VGA card will turn of
V/H-SYNC automatically.)
• Suspend Mode
The default value is Disabled.
Disabled Disable Suspend Mode.
1 min - 1
Hour
Setup the timer to enter Suspend Mode.
• HDD Power Down
The default value is Disabled.
Disable Disable HDD Power Down mode function.
1-15 mins. Enable HDD Power Down mode between 1 to 15 mins.
• VGA Active Monitor
The default value is Disabled.
Disabled Disable monitor VGA activity.
Enabled Enable monitor VGA activity.
To Next Page
Loading...
