BX2000
4-20
• Soft-off by PWR-BTTN
The default value is Instant-Off.
Instant-off Soft switch ON/OFF for POWER ON/OFF
Delay 4 Sec. Soft switch ON 4sec. for POWER OFF.
• System After AC Back
The default value is Soft-Off.
Memory This function depends on computer status
Soft-Off Set System Soft-Off Status.
Full-On Set System Full-On Status.
• Power LED in Suspend
The default value is BLINKING.
BLINKING Set Power LED in Suspend at BLINKING mode.
ON Set Power LED in Suspend at ON mode.
OFF/DUAL Set Power LED in Suspend at OFF/DUAL mode.
• CPUFAN Off In Suspend
The default value is Enabled.
Disabled Disable this function.
Enabled Stop CPU FAN when entering Suspend mode.
• PME Event Wakeup
The default value is Enabled.
Disabled Disable PME Event Wakeup.
Enabled Enable PME Event Wakeup.
To Next Page
Loading...
