Gigabyte GA-E350N WIN8 - M.I.T. (Memory Intelligent Tweaker); M.I.T. Current Status; Advanced Frequency Settings

- 17 -
2-2 M.I.T.
Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall
system congurations. Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory
and reduce the useful life of these components. This page is for advanced users only and we recommend you not to
alter the default settings to prevent system instability or other unexpected results. (Inadequately altering the settings
may result in system's failure to boot. If this occurs, clear the CMOS values and reset the board to default values.)
This section provides information on the BIOS version, CPU base clock, CPU frequency, memory frequency,
total memory size, CPU temperature, Vcore, and memory voltage.
` M.I.T. Current Status
This screen provides information on CPU/memory frequencies/parameters.
` Advanced Frequency Settings
& BCLK Clock Control
Allows you to manually set the CPU base clock in 1 MHz increments. (Default: Auto)
Important: It is highly recommended that the CPU frequency be set in accordance with the CPU
specications.
& Processor Graphics Clock
Allows you to set the onboard graphics clock. The adjustable range is from 300 MHz to 2000 MHz.
& CPU NB Clock Divisor
Allows you to set the CPU North Bridge frequency divisor.
& CPU NB Clock Frequency
The rst value is the normal operating CPU North Bridge frequency of the CPU being used; The second
value is CPU North Bridge frequency that is automatically adjusted according to the CPU NB Clock Divisor
settings.