Gigabyte GA-E350N WIN8 - Peripheral Device Configuration; SATA, Audio, USB, and LAN Settings; Legacy Support and Emulation

- 23 -
& OnChip SATA Controller
Enables or disables the integrated SATA controllers. (Default: Enabled)
& OnChip SATA Type
Allows you to decide whether to congure the SATA controller integrated in the Chipset to AHCI mode.
Native IDE Congures the SATA controller to IDE mode. (Default)
AHCI Congures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI)
is an interface specication that allows the storage driver to enable advanced Serial ATA
features such as Native Command Queuing and hot plug.
& HD Audio Azalia Device
Enables or disables the onboard audio function. (Default: Enabled)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to
Disabled.
& Onboard USB Device
Enables or disables the integrated USB controller. (Default: Enabled)
& OnBoard LAN Controller
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
& Legacy USB Support
Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled)
& EHCI Hand-off
Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off
support. (Default: Disabled)
& Port 60/64 Emulation
Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support
for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices.
(Default: Disabled)
2-5 Peripherals