Need help?Do you have a question about the Gigabyte GA-F2A55M-S1 and is the answer not in the manual?
General| Memory voltage | 1.5 V |
|---|---|
| Memory channels | Dual-channel |
| Memory slots type | DIMM |
| Number of memory slots | 2 |
| Supported memory types | DDR3-SDRAM |
| Maximum internal memory | 64 GB |
| Supported memory clock speeds | 1066, 1333, 1600, 1866, 2400 MHz |
| Processor socket | Socket FM2 |
| Processor manufacturer | AMD |
| Compatible processor series | AMD A |
| S/PDIF out connector | Yes |
| Number of SATA connectors | 4 |
| Number of EATX power connectors | 1 |
| Number of Parallel ATA connectors | 0 |
| USB 3.2 Gen 1 (3.1 Gen 1) connectors | - |
| Headphone outputs | 3 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Audio chip | Realtek ALC887 |
| Component for | PC |
| Power source type | ATX |
| Motherboard chipset | AMD A55 |
| Audio output channels | 7.1 channels |
| Motherboard form factor | micro ATX |
| Supported storage drive interfaces | SATA II |
| BIOS type | EFI AMI |
| ACPI version | 1.0b |
| BIOS memory size | 32 Mbit |
Weight and Dimensions| Depth | 174 mm |
|---|---|
| Width | 225 mm |
Important safety and handling guidelines before installing hardware.
Details specifications for CPU socket, chipset, and memory support.
Specifications for onboard graphics, audio codec, and LAN controller.
Step-by-step instructions for installing the APU correctly.
Guides memory installation and explains dual channel configuration.
Introduces BIOS setup, POST, and accessing the program.
Describes the GIGABYTE logo screen and function keys.
Introduces the M.I.T. section for system tuning.
Allows manual adjustment of CPU base clock and PCIe frequency.
Details settings for CPU clock ratio and onboard graphics clock.
Covers CPU core settings, XMP/AMP profiles, and memory multipliers.
Details DRAM timing selection, DDR voltage, and interleaving settings.
Allows adjustment of CPU, chipset, and memory voltages.
Monitors system voltages, temperatures, and fan speeds.
Sets the overall boot order from available devices.
Configures resume by alarm, soft-off, and AC power return states.
To Next Page