Gigabyte GA-F2A85XM-HD3 - Dram Timing Selectable

- 32 -
This sub-menu provides memory timing settings for each channel of memory. The respective timing setting
screensarecongurableonlywhenDRAM Timing Selectable is set to Quick or Expert. Note: Your system
may become unstable or fail to boot after you make changes on the memory timings. If this occurs, please reset
theboardtodefaultvaluesbyloadingoptimizeddefaultsorclearingtheCMOSvalues.
` Channel A/B Timing Settings
& DRAM Timing Selectable
Quick and Expertallowsthememorytimingsettingsbelowtobecongurable.Optionsare:Auto(default),
Quick, Expert.
& ProleDDRVoltage
When using a non-XMP memory module or ExtremeMemoryProle(X.M.P.) is set to Disabled, this item
will display as 1.50V. When ExtremeMemoryProle(X.M.P.) is set to Prole1 or Prole2, this item will
display the value based on the SPD data on the XMP memory.
& ProleVTTVoltage
The value displayed here is dependent on the CPU being used.
& RankInterleaving
Enables or disables memory rank interleaving. Enabled allows the system to simultaneously access different
ranksofthememorytoincreasememoryperformanceandstability.(Default:Enabled)
& ChannelInterleaving
Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access
differentchannelsofthememorytoincreasememoryperformanceandstability.(Default:Enabled)