Gigabyte GA-F2A85XM-HD3 - Peripherals

- 39 -
2-6 Peripherals
& OnChipSATAChannel
 EnablesordisablestheintegratedSATAcontrollers.(Default:Enabled)
& OnChipSATAType
 EnablesordisablesRAIDfortheSATAcontrollersintegratedintheAMDChipsetorcongurestheSATA
controllers to AHCI mode.
NativeIDE  CongurestheSATAcontrollertoIDEmode.
RAID Enables RAID for the SATA controller.
AHCI   CongurestheSATAcontrollerstoAHCImode.AdvancedHostControllerInterface
(AHCI)isaninterfacespecicationthatallowsthestoragedrivertoenableadvanced
SerialATAfeaturessuchasNativeCommandQueuingandhotplug.(Default)
& OnChipSATAPort4-7Type(SATA34~SATA37connectors)
 ThisoptioniscongurableonlywhenOnChipSATAType is set to RAID or AHCI.Congurestheoperating
mode of the integrated SATA3 4~SATA3 7 connectors.
AsSATAType ThemodedependsontheOnChipSATATypesettings.(Default)
IDE   DisablesRAIDfortheSATAcontrollerandcongurestheSATAcontrollertoIDEmode.
& EnableallUSBdevice
 EnablesordisablestheintegratedUSBcontroller.(Default:Enabled)
& HDAudioAzaliaDevice
 Enablesordisablestheonboardaudiofunction.(Default:Enabled)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to
Disabled.
& IOMMU
 EnablesordisablesAMDIOMMUsupport.(Default:Enabled)
& OnboardLANController
 EnablesordisablestheonboardLANfunction.(Default:Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.