To Next Page

To Previous Page

- 19 -

Hardware Installation

1-6 SetupoftheAMDDualGraphicsConguration

Combining the onboard GPU with a discrete graphics card, AMD's Dual Graphics technology can provide

signicantlyadvanceddisplayperformanceforAMDplatform.Readthefollowinginstructionsonconguringa

Dual Graphics system.

A. System Requirements

- AMD A series processor

- Windows8/7operatingsystem

- AnAMDDualGraphicstechnology-supportedmotherboard(withtheBIOSupdatedtothelatestversion)

andcorrectdriver(makesuretheonboardgraphicsdriverversionisRev.8.982orabove)

- An AMD Radeon

™

HD6000seriesgraphicscardthatsupportsAMDDualGraphicstechnology(formore

details,pleasevisitAMD'sofcialwebsite)andcorrectdriver

B.InstallingtheGraphicsCardsandConguringBIOSSetup

Step 1:

Observe the steps in "1-5 Installing an Expansion Card" and install an AMD Dual Graphics technology-supported

graphics card on the PCIEX16 slot. Plug the monitor cable into the graphics card and start up your computer.

Step 2:

Enter BIOS Setup to set the following items under the Peripherals\GFXConguration menu:

- Set Integrated Graphics to Force.

- Set UMA Frame Buffer Size to 512M or above.

Save the settings and exit BIOS Setup. Restart your computer.

C.ConguringtheGraphicsCardDriver

After installing the graphics card driver in the operating system, go to the

AMD VISION Engine Control Center. Browse to Performance\AMD

Radeon

™

Dual Graphics and ensure the Enable AMD Radeon Dual

Graphics check box is selected.

(Note) MakesurethedriversfortheChipset,onboardgraphics,andexternalgraphicscardareproperly

installed.

Procedure and driver screen for enabling the AMD Dual Graphics technology may differ by graphics

card and driver version. Refer to the manual that came with your graphics card for more information.

Gigabyte GA-F2A88X-UP4 User Manual

Questions and Answers: