Gigabyte GA-H170TN - Page 20

- 20 -
20) LCD_VCC (LVDS Drive Voltage Jumper)
 Thisjumpercanbeusedtoprovidedifferentscreenvoltagesettings.
1
1
1-2 Close: Set to 3V.
2-3 Close: Set to 5V. (Default setting)
21) FPD_PWR (Flat Panel Display Power Jumper)
 Thisjumperallowsyoutoselecttherequiredoperatingvoltageforthebacklightpanel.
1-2 Close: Set to 12V.
2-3 Close: Set to 19V. (Default setting)
1
1