Gigabyte GA-H170TN - Boot Menu and Device Priority

- 34 -
2-5 Boot Menu
The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error
messageifthedrive(s)speciedisnotbootable.
& Full Screen LOGO Show
Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled skips the
GIGABYTE Logo when the system starts up. (Default: Enabled)
& Boot Option Priorities
 Speciestheoverallbootorderfromtheavailabledevices.Forexample,youcansetharddriveasthe
rstpriority(BootOption#1)andDVDROMdriveasthesecondpriority(BootOption#2).Thelistonly
displaysthedevicewiththehighestpriorityforaspecictype.Forexample,onlyharddrivedenedasthe
rstpriorityontheNetwork Device BBS Priorities submenu will be presented here.
 RemovablestoragedevicesthatsupportGPTformatwillbeprexedwith"UEFI:"stringonthebootdevice
list.TobootfromanoperatingsystemthatsupportsGPTpartitioning,selectthedeviceprexedwith"UEFI:"
string.
Or if you want to install an operating system that supports GPT partitioning such as Windows 7 64-bit, select
theopticaldrivethatcontainstheWindows764-bitinstallationdiskandisprexedwith"UEFI:"string.
Bios Setup Utility
Save & ExitSecurityMain
 BootConguration
Full Screen LOGO Show [Enabled
]
Boot Option Priorities
 BootOption#1    [UEFI:Built-inEFIShell]
 BootOption#2    [RealtekPXEB01D00]
Network Device BBS Priorities
gf: Select Screen
hi: Select Item
ENTER: Select
+/-: Change Opt.
F1: General Help
F3: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Advanced Chipset Boot