Gigabyte GA-H61TN - BIOS Advanced: SATA Configuration; SATA Mode Selection (IDE, RAID, AHCI); Serial ATA Port Identification

- 36 -
2-2-3 SATAConguration
&
SATA Mode Selection
j
EnablesordisablesRAIDfortheSATAcontrollersintegratedintheIntelH77Chipsetorconguresthe
SATA controllers to AHCI mode.

IDE  CongurestheSATAcontrollertoIDEmode.

RAID Enables RAID for the SATA controller.

AHCI  CongurestheSATAcontrollerstoAHCImode.AdvancedHostControllerInterface(AHCI)
isaninterfacespecicationthatallowsthestoragedrivertoenableadvancedSerialATA
features such as Native Command Queuing and hot plug. (Default)
&
SATA Mode Selection
kl
AllowsyoutodecidewhethertoconguretheSATAcontrollerintegratedintheChipsettoAHCImode.

IDE  CongurestheSATAcontrollertoIDEmode.

AHCI  CongurestheSATAcontrollerstoAHCImode.AdvancedHostControllerInterface(AHCI)
isaninterfacespecicationthatallowsthestoragedrivertoenableadvancedSerialATA
features such as Native Command Queuing and hot plug. (Default)
&
Serial ATA Port 0/Serial ATA Port 1/Serial ATA Port 2/Serial ATA Port 3
jk
/mSATA
(Note)
ThecategoryidentiesSerialATAandmSATAtypesofharddiskthatareinstalledinthecomputer.
System will automatically detect HDD type.
 Notethatthespecicationsofyourdrivemustmatchwiththedrivetable.Theharddiskwillnotwork
properly if you enter improper information for this category.
Hard drive information should be labeled on the outside device casing. Enter the appropriate option
based on this information.
j
Only for GA-H77TN.
k
Only for GA-B75TN.
l
Only for GA-H61TN.