Gigabyte GA-H77M-HD3 - Smart Recovery 2

- 65 -
Unique Features
4-4 Smart Recovery 2
SmartRecovery2allowsyoutobackupapartitionasanimageleeveryhour.Youcanusetheseimagesto
restoreyoursystemorleswhenneeded.
• Supported operating systems: Windows 7 and Vista.
• SmartRecovery2onlysupportsNTFSlesystem.
• YouneedtoselectthedestinationpartitioninSettingsthersttime
••youuseSmartRecovery2.
• The Backup Now button will be available only after you log in Windows
for ten minutes.
Creating a backup:
Click the Settings button on the main menu. In the Settings dialog box,
select the source partition and destination partition and click OK. The
initial backup will start after 10 minutes and regular backup will be
performed hourly. Note: By default, all partitions on the system drive
are selected as the backup source. The backup destination cannot be
on the same partition as the backup source.
Recoveringale:
Click the File Recovery button on the main menu. Use the time slider on
the top of the popped out window to select a previous backup time. The
right pane will display the backed-up partitions in the backup destination
(intheMyBackupfolder).Browsetotheleyouwantandcopyit.
The Smart Recovery 2 main menu:
Button Description
Settings
Allows you to select the source and destination
partition
Backup Now Allows you to perform the backup immediately
File Recovery...
Allowsyoutorecoveryourlesfromthebackup
image
System
Recovery...
Allows you to recover your system from the
backup image
Saving the the backup to a network location:
If you want to save the backup to a network location, select Browse
network location. Make sure your computer and the computer where you
want to save the backup are in the same domain. Choose the network
location where you want to store the backup and enter the user name
and password. Follow the on-screen instructions to complete.