Gigabyte GA-K8U - Frequency;Voltage Control

GA-K8U Motherboard - 40 -
English
2-7 Frequency/Voltage Control
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Frequency/Voltage Control
K8 CPU Clock Ratio [Default]
Auto Detect PCI Clk [Enabled]
CPU Clock [200MHz]
CPU OverVoltage Control [Auto]
DIMM OverVoltage Control [Auto]
VCC18 OverVoltage Control [Auto]
VCC12 OverVoltage Control [Auto]
AGP OverVoltage Control [Auto]
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level`
K8 CPU Clock Ratio
Default Set K8 CPU Clock Ratio to CPU factory default. (Default value)
x4 800Mhz ~ x10 2000Mhz. Set K8 CPU Clock Ratio from x4 800Mhz to x10 2000Mhz.
Auto Detect PCI Clk
Enabled Detect PCI clock automatically. (Default value)
Disabled Disable this function.
CPU Clock
200 ~ 232MHz Set CPU clock from 200Mhz to 232Mhz.
CPU OverVoltage Control
Auto Supply voltage as CPU required. (Default value)
+5%, +7.5%, +10% Increase voltage range as user selected.
DIMM OverVoltage Control
Auto Supply voltage as DDR module required. (Default value)
+0.1V, +0.2V Increase voltage range as user selected.
VCC18 OverVoltage Control
Auto Supply voltage as VCC18 required. (Default value)
+5%, +7.5%, +10% Increase voltage range as user selected.
VCC12 OverVoltage Control
Auto Supply voltage as VCC12 required. (Default value)
+5%, +7.5%, +10% Increase voltage range as user selected.
AGP OverVoltage Control
Auto Supply voltage as AGP required. (Default value)
+5%, +7.5%, +10% Increase voltage range as user selected.
Incorrect using these features may cause your system broken. For power end-user use only.