GA-M52S-S3P Motherboard - 48 -
English
2-9 MB Intelligent Tweaker(M.I.T.)
CPU Frequency
Allows you to manually set the CPU host frequency.
Important It is highly recommended that the CPU frequency be set in accordance with the CPU
specifications.
PCIE Clock
Allows you to manually set the PCIe clock frequency. The adjustable range is from 100 Mhz to
150 Mhz. Auto sets the PCIe clock frequency to standard 100 Mhz. (Default: Auto)
CPU Clock Ratio
Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the
CPU being used.
Robust Graphics Booster
Robust Graphics Booster (R.G.B.) helps to enhance the performance of the graphics chip and
memory. Auto allows the BIOS to automatically set the R.G.B. mode based on system
configurations. Options are: Auto (default), Fast, Turbo.
Chipset Voltage Control
Allows you to set the chipset voltage.
Normal Supplies the chipset voltage as required. (Default)
+0.025V~+0.200V Increases the chipset by 0.025V to 0.200V.
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
MB Intelligent Tweaker(M.I.T.)
CPU Frequency [200]
PCIE Clock [100Mhz]
CPU Clock Ratio [Auto]
Robust Graphics Booster [Auto]
Chipset Voltage Control [Normal]
DDR2 Voltage Control [Auto]
CPU Voltage Control [Normal]
Normal CPU Vcore 1.3500V
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level`
Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory
and reduce the useful life of these components. This page is for advanced users only and we
recommend you not to alter the default settings to prevent system instability or other unex-
pected results. (Inadequately altering the settings may result in system's failure to boot. If this
occurs, clear the CMOS values and reset the board to default values.)
To Next Page
Loading...
Need help?
General
