Unique Features- 57 -
E. Removing the Backup
D. Using the Restore Function in Xpress Recovery2
F. Exiting Xpress Recovery2
Select REBOOT to exit Xpress Recovery2.
Select RESTORE to restore the backup to your hard
drive in case the system breaks down. The RESTORE
option will not be present if no backup is created before.
Step 1:
If you wish to remove the backup file, select
REMOVE.
Step 2:
After the backup file is removed, no backup
image file will be present in Disk Management
and hard drive space will be freed up.
To Next Page
Loading...
