Appendix- 77 -
S/PDIF Coaxial Cable
S/PDIF Optical Cable
Step 3:
Connect a S/PDIF coaxial cable or a S/PDIF optical cable (either
one) to an external decoder for transmitting the S/PDIF digital
audio signals.
B-2. Configuring S/PDIF Out:
On the Digital Output screen, click the Default Format tab and then select the sample rate and bit depth.
Click OK to complete.
B-1. Configuring S/PDIF In:
On the Digital Input screen, click the Default Format tab to select the default format. Click OK to complete.
B. Configuring S/PDIF In and Out:
To Next Page
Loading...
