Gigabyte GA-M68MT-S2P - Key BIOS Configuration Settings

- 33 - BIOS Setup
2-3 MB Intelligent Tweaker(M.I.T.)
Whether the system will work stably with the overclock settings you made is dependent on your over-
allsystemcongurations.IncorrectlydoingoverclockmayresultindamagetoCPU,chipset,or
memory and reduce the useful life of these components. This page is for advanced users only and
we recommend you not to alter the default settings to prevent system instability or other unexpected
results. (Inadequately altering the settings may result in system's failure to boot. If this occurs, clear
the CMOS values and reset the board to default values.)
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
MB Intelligent Tweaker(M.I.T.)
Set Memory Clock [Auto]
x Memory Clock x5.33 1066Mhz

 DRAMConguration   [PressEnter]
CPU NB VID Control [Normal]
CPU Voltage Control [Normal]
DDR3 Voltage Control [Auto]
Normal CPU Vcore 1.3500V
higf
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level

Set Memory Clock
Determines whether to manually set the memory clock. Auto lets BIOS automatically set the memory
clock as required. Manualallowsthememoryclockcontrolitembelowtobecongurable.(Default:Auto)
Memory Clock
 ThisoptioniscongurableonlywhenSet Memory Clock is set to Manual.
X4.00 Sets Memory Clock to X4.00.
X5.33 Sets Memory Clock to X5.33.
X6.66 Sets Memory Clock to X6.66.
X8.00 Sets Memory Clock to X8.00.