GA-M78SM-S2H Motherboard - 48 -
(Note) This item is present only if you install a CPU that supports this feature.
DRAM Configuration
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
DRAM Configuration
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level`
Timing Mode [Auto]
x Memory Clock DDR 533
x CAS# latency 4T
DCTs Mode
(Note)
[Unganged]
Timing Mode
Manual allows all Timing mode below to be configurable.
Options are: Auto (default), Manual.
Memory Clock
This option is configurable only when Timing Mode is set to Manual.
When you use an AM2 CPU:
DDR 400 Sets Memory Clock to DDR 400.
DDR 533 Sets Memory Clock to DDR 533.
DDR 667 Sets Memory Clock to DDR 667.
DDR 800 Sets Memory Clock to DDR 800.
When you use an AM2+ CPU:
X2.00 Sets Memory Clock to X2.00.
X2.66 Sets Memory Clock to X2.66.
X3.33 Sets Memory Clock to X3.33.
X4.00 Sets Memory Clock to X4.00.
X5.33 Sets Memory Clock to X5.33.
CAS# latency
Options are: 3T, 4T (default), 5T, 6T.
DCTs Mode
(Note)
Allows you to set memory control mode.
Ganged Sets memory control mode to single dual-channel.
Unganged Sets memory control mode to two single-channel.
To Next Page
Loading...
