- 43 - BIOS Setup
2-5 Integrated Peripherals
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Integrated Peripherals
` SATA-II RAID Config [Press Enter]
On-Chip IDE Channel0 [Enabled]
IDE DMA transfer access [Enabled]
On-Chip MAC Lan [Auto]
Onboard LAN Boot ROM [Disabled]
NV Serial-ATA Controller [All Enabled]
IDE Prefetch Mode [Enabled]
On-Chip USB [V1.1+V2.0]
USB Keyboard Support [Disabled]
USB Mouse Support [Disabled]
Onboard Audio Function [Auto]
` SMART LAN [Press Enter]
Legacy USB storage detect [Enabled]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]
x ECP Mode Use DMA 3
Item Help
Menu Level`
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
SATA-II RAID Config
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
SATA-II RAID Config
Item Help
Menu Level``
SATA-II RAID function [Disabled]
x SATA-II 1 Primary RAID Enabled
x SATA-II 1 Secondary RAID Enabled
x SATA-II 2 Primary RAID Enabled
x SATA-II 2 Secondary RAID Enabled
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
SATA-II RAID function
Enables or disables RAID for the integrated SATA 3Gb/s controllers. Enabled allows you to
configure RAID for individual SATA channel. (Default: Enabled)
SATA-II 1 Primary RAID
Enables or disables RAID for the first channel of the first integrated SATA 3Gb/s controller.
(Default: Enabled)
SATA-II 1 Secondary RAID
Enables or disables RAID for the second channel of the first integrated SATA 3Gb/s controller.
(Default: Enabled)
SATA-II 2 Primary RAID
Enables or disables RAID for the first channel of the second integrated SATA 3Gb/s controller.
(Default: Enabled)
To Next Page
Loading...
Need help?
General
