Gigabyte GA-X150M-PLUS WS - Page 27

& Pending operation
To clear TPM related settings, set this item to TPM Clear.(Default:None)
& TPM 20 InterfaceType
Allows you to select the communication interface for the TPM 2.0 device. Set to External TPM2.0 if you
installanInneonTPM2.0module(optional).(Default:PTT)
& Device Select
Allows you to select whether to support TPM 1.2 or TPM 2.0 device. Auto lets the BIOS automatically
congurethissetting.(Default:Auto)
` SuperIOConguration
& Serial Port 1
 Enablesordisablestheonboardserialport.(Default:Enabled)
` Intel(R) Bios Guard Technology
Enables or disables the Intel
®
BIOS Guard feature, which protects the BIOS from malicious attacks.
` SATAConguration
& SATA Controller(s)
 EnablesordisablestheintegratedSATAcontrollers.(Default:Enabled)
& SATA Mode Selection
 EnablesordisablesRAIDfortheSATAcontrollersintegratedintheChipsetorcongurestheSATAcontrollers
to AHCI mode.
RAID   EnablesRAIDfortheSATAcontroller.
AHCI   CongurestheSATAcontrollerstoAHCImode.AdvancedHostControllerInterface
(AHCI)isaninterfacespecicationthatallowsthestoragedrivertoenableadvanced
SerialATAfeaturessuchasNativeCommandQueuingandhotplug.(Default)
& Aggressive LPM Support
 Enablesordisablesthepowersavingfeature,ALPM(AggressiveLinkPowerManagement),fortheChipset
SATAcontrollers.(Default:Enabled)
& Port 0/1/2/3/4/5
 EnablesordisableseachSATAport.(Default:Enabled)
& Hot plug
 EnablesordisablethehotplugcapabilityforeachSATAport.(Default:Disabled)
& External SATA
 EnablesordisablessupportforexternalSATAdevices.(Default:Disabled)
` NVMeConguration
DisplaysinformationonyourNVMEPCIeSSDifinstalled.
` Realtek PCIe GBE Family Controller
Thissub-menuprovidesinformationonLANconguration.
- 27 -