BIOS Setup - 36 -
BIOS Setup Menus
M.I.T.
system/CPU temperatures, voltages, and fan speeds.
System
also displays information on the devices connected to the SATA ports.
BIOS Features
display adapter.
Peripherals
LAN, etc.
Power Management
Save & Exit Setup
Save all the changes made in the BIOS Setup program to the CMOS and exit BIOS Setup. You can save the
BIOS Setup Program Function Keys
<f><g>
Move the selection bar to select a setup menu
<h><i>
<Enter> Execute command or enter a menu
<+>/<Page Up> Increase the numeric value or make changes
<->/<Page Down> Decrease the numeric value or make changes
<F1> Switch to 3D BIOS screen
<F5> Restore the previous BIOS settings for the current menu
<F7> Load the optimized BIOS default settings for the current menu
<F8> Access the Q-Flash utility
<F9> Display system information
<F10> Save all the changes and exit the BIOS Setup program
<F12> Capture the current screen as an image and save it to your USB drive
<Esc> Main Menu: Exit the BIOS Setup program
Submenus: Exit current submenu
If the system is not stable as usual, load optimized defaults to set your system to its defaults. •
The BIOS Setup menus described in this chapter are for reference only and may differ by BIOS •
version.
To Next Page
Loading...
